Safety Razor :
A safety razor is a device used to remove hair from areas of the body where it is undesirable such as the face for men and the legs and underarm regions for women. The modern blade razor consists of a specially designed blade mounted in a metal or plastic shell that is attached to a handle. This kind of razor can be designed as a refillable cartridge which can accept new blades or as a disposable unit which is intended to be thrown away after the blade becomes dull.
Courtesy : Merkur
Until the nineteenth century, the most common razor was still a long handled open blade called a "cut-throat" razor which was difficult to use, required repeated sharpening, and was usually wielded by professional barbers. Credit for the first safety razor is generally given to a Frenchman, Jean-Jacques Perret, who modeled his design after a joiner's plane. He even wrote a book on the subject entitled Pogonotomy or the Art of Learning to Shave Oneself. As with the razors of today, Perret's design covered the blade on three sides to protect the user from nicks and cuts. However, it still required periodic sharpening to give a good shave. Similar inventions were introduced throughout the 1800s. Nonetheless, even as late as the early 1900s most men were still shaved periodically at the barber.
Shaving practices began to change dramatically around the turn of the century. In 1895, an American named King Camp Gillette had the idea of marketing a disposable blade that didn't require sharpening. Gillette designed a razor that had a separate handle and clamp unit that allowed the user to easily replace the blade when it became dull. However, metal working technology took another two years before it was able to make the paper thin steel blades required by Gillette's design. Even though he filed patents in 1901, Gillette could not market his disposable blades until 1903 when he produced a total of 51 razors and 168 blades. By 1905, sales rose to 90,000 razors and 2.5 million blades. Sales continued to grow over the next several years, reaching 0.3 million razors and 14 million blades in 1908. After Gillette's initial success, other manufacturers soon followed suit with their own designs, and an entire industry was born. Over the last 90 years, a variety of products have been introduced including tiny safety razors for women, long-life stainless steel blades, twin-blade safety razors, the completely disposable, one-piece plastic razor introduced by Bic, and the state of the art Sensor and Mach 3 shaving systems by Gillette.
Design
Razor designs vary depending on the style. Some razors, such as the single piece disposables, are relatively simple. They consist of a hollow plastic handle, a blade, and a head assembly to keep the blade in place. They are primarily designed to be simple, economical, and disposable. The refillable cartridge style is more complicated. They are designed to give a more premium shaving experience with options like multiple blades, pivoting heads, and lubricating strips. For example, Gillette's Mach 3 razor, which was introduced in 1998, features a skin guard comprised of flexible microfins, a soft grip handle, water-activated moisturizers, a flow-through cartridge, optimal blade positioning, and other innovative features. The engineering behind some of these advancements is quite impressive. Gillette employs 500 design engineers, who are constantly developing new shaving systems. Preliminary designs are developed into working prototypes that are tested by over 300 company employees, who take part in Gillette's shave-at-work program. The company has 20 booths set up where employees use unmarked razors on different sides of their faces. They then rate performance attributes of each razor with the aid of a computer program. Engineers use this feedback to adjust their designs and create improved prototypes for further evaluation.
Raw Materials
Blades
Razor blades are periodically exposed to high levels of moisture and therefore must be made from a special corrosion resistant steel alloy. Furthermore, the grade of steel must be hard enough to allow the blade to hold its shape, yet malleable enough to allow it to be processed. The preferred type of steel is called carbide steel because it is made using a tungsten-carbon compound. One patented combination of elements used in stainless steel blade construction includes carbon (0.45-0.55%), silicon (0.4-1%); manganese (0.5-1.0%); chromium (12-14%) and molybdenum (1.0-1.6%); with the remainder being iron.
Plastic parts
The plastic portions of a safety razor include the handle and blade cartridge, or portions thereof, depending on the razor design. These parts are typically molded from a number of different plastic resins including polystyrene, polypropylene, and phenyleneoxide based resins as well as elastomeric compounds. These resins are taken in pellet form and are melted and molded into the razor components through a combination of extrusion and injection molding techniques. For example, in making the handle for their advanced shaving systems, Gillette uses a coextrusion process which simultaneously molds an elastomer molded over polypropylene to create a surface that is easy to grip.
Other components
Razors may contain a variety of miscellaneous parts which help hold the blade in place, guards which cover the blade during shipping, or springs or other release mechanisms which facilitate changing of the blades. These pieces are molded by similar processes. The more sophisticated brands include a lubricating strip made of polyurethane, or other similar materials, that is impregnated with acrylic polymers. These strips are mounted on the head of the razor, in front of the blades. The polymer film absorbs water and becomes very slippery, thus creating a lubricating surface that helps the blade glide across the surface of the face without snagging or cutting the skin.
The Manufacturing Process
Cutting blade formation
• 1 Blade manufacturing processes involve mixing and melting of the components in the steel. This mixture undergoes a process known as annealing, which makes the blades stronger. The steel is heated to temperatures of 1,967-2,048°F (1,075-1,120°C), then quenched in water to a temperature between -76- -112° F (-60- -80° C) to harden it. The next step is to temper the steel at a temperature of (482-752°F (250- 400°C).
• 2 The blades are then die stamped at a rate of 800-1,200 strokes a minute to form the appropriate cutting edge shape. The actual cutting edge of modern cartridge style razor blade is deceptively small. The entire cutting surface is only about 1.5 in (3.81cm) wide by 1 mm deep. This is compared to traditional razor blades which are almost 20 times wider and several times thicker. This design creates efficiencies in manufacturing by allowing the creation of a durable cutting surface using very little metal. Because the blade is so small, a special support structure is required to hold it inside the cartridge.
Support member formation
• 3 At a separate work station, another sheet of metal passes through a die and cutter device to form a series of L-shaped support members. These support members are formed in a line with two edge runners connected to each side.
• 4 The row of supports, still connected to the edge runners is rolled onto a coil and transported to the next station. There the support pieces are severed from the edge runners which are collected in a waste bin. The support members are dropped into a funnel-like device equipped with a vibrating unit which deposits individual support members onto a conveyor belt. The belt transfers the members in a single file fashion the third work station where they are welded onto the cutting blade. The finished blade assembly is then ready for mounting in the cartridge. Because the entire process is automated, waste from broken or bent cutting blades and support members is minimized.
Plastic component molding
• 5 Concurrent with the blade-making operations, the plastic components are molded and readied for assembly. The plastic resins are mixed with the plasticizers, colorants, antioxidants, stabilizers, and fillers. The powders are mixed together and melted in a special heated screw feeder. The resultant mixture is cut into pellets which can be used in subsequent molding operations.
• 6 Plastic razor parts are typically extrusion molded. In this process, molten plastic is shaped by being forced through the opening of a die. The parts can also be manufactured by injection molding, where plastic resin and other additives are mixed together, melted, and injected into a two piece mold under pressure. After the plastic has cooled, the mold is opened and the plastic parts are ejected. Major manufacturers have extremely efficient molding operations with cycle times for molded plastic parts routinely below 10 seconds. These processes are so efficient that the thermoplastic runners and other scrap from the molding process are reground, remelted, and reused.
Assembly of components
• 7 The molded plastic components are fed to various work stations where the blade assembly is inserted into the cartridge. The work surfaces in these stations are equipped with vacuum lines to orient and hold the small blade parts in place during transport and insertion. Spring loaded arms push the blades into place and secure them in the cartridge slots. The finished cartridge may be attached to the razor handle during subsequent operations or they may be packaged separately. This step may include insertion of springs and other parts in the handle to allow ejection of the cartridge.
Packaging
• 8 Razors are routinely packaged in clear plastic blister packs with a cardboard backing sheet that allow display of the razors design. Refill blade cartridges can be packaged in boxes, although most current designs require the cartridges to be held in a plastic tray that helps insert them into the handle.
Modern safety razors
Cartridges introduced
Until the early 1970s, most safety razors were manufactured to accept a single, disposable razor blade. These blades were manufactured with either one or two sharpened edges, depending upon the design of the razor. This style of razor is no longer manufactured in the United States and is instead made by a number of companies such as Merkur of Germany, Treet of Pakistan, Weishi of China, and Parker of India. The blades are still being made today in a wide variety of countries including the USA, Israel, Russia, Korea, Japan, Eygpt and the UK. Some of the brand names include Merkur, Feather, Polsilver, Racer, Bigben, Lord, Treet and Bic.
An innovation was the replaceable blade cartridge containing the blade which reduced the risk of the user receiving a cut from the unprotected blades used up until then. These took the form of a cartridge, with the blade fixed within a plastic enclosure of the type still in use today. In 1965 Gillette introduced the Techmatic razor which utilized a cartridge with a steel strip that could be wound forward to expose a fresh section of new blade
It is often debated why Gillette, ASR, and Schick transitioned to the cartridge type razor. One explanation for the shift was that it gave companies control over the blades that were used with their razors. Before the introduction of cartridges, as many as thirty different companies world-wide were making blades that could fit Gillette's razors[ ,thereby engendering intense competition, driving prices and, consequently, profits down. Currently there are as many as twenty companies world wide making double-edge blades, including ASR, Dinosaur, Goldcow, Bic, Merkur, Wilkinson, Gillette, Panda, Feather, Derby, Crystal, Astra, and many more. However few of the companies who were making blades when Gillette introduced the Trac II razor are believed to still be in business today. If control could be maintained over the blade, the producer could raise prices at will, something that is not possible with safety razors. At the current time it is possible to find cartridge blades at a price of $3.24 per cartridge while a double-edge blade can be had for as little as $.10
The most popular of the single bladed razors are the Merkur Heavy Duty and the Gillette Super Speed. The Heavy Duty is still made today by Merkur and the Super Speed can be purchased on eBay.
Twin blades
Circa 1971, Gillette introduced the Trac II, designed by Francis Dorion, which was the first mass-produced multi-blade razor available in the United States. Rather than accepting standard razor blades, this razor was fitted with a proprietary disposable blade cartridge containing two separate blades. By controlling patents on the Trac II razor, Gillette was able to assure repeat sales of its multi-blade cartridges for use in its razor. This was a natural extension of the razor-and-blades sales philosophy. Gillette was able to sell these cartridges at a higher price than the single blades, leading to higher profits. Competitors Schick and ASRCO were quick to follow this change, introducing their own multi-blade razors. The various brands were designed not to be interchangeable: each manufacturer hoped to get customers accustomed to using its own design.
Gillette subsequently introduced the Atra twin-blade razors, which featured a pivoting razor head that the company claimed would more closely follow the shape of the face. The Trac II Plus and Atra Plus blades introduced later incorporated a "lubricating strip".
Gillette followed the Atra system with the Sensor system (known as Contour in many parts of the world), which featured twin blades that were individually spring-loaded to adjust to the contours of the face. The Sensor system was later modified as the SensorExcel system.
Disposable razor
The next innovation came with the introduction of the Bic disposable razor in 1974. Instead of being a razor with a disposable blade, the entire razor was manufactured to be disposable. Gillette's response was the Good News disposable razor which was launched on the US market in 1976 before the Bic disposable was made available on that market.[ This came to market at a time when American society preferred to discard most things rather than reuse them. Shortly thereafter, Gillette modified the Good News construction to add an aloe strip above the razor, resulting in the Good News Plus. The purported benefit of the aloe strip is to ease any discomfort felt on the face while shaving. Plastic disposable razors and razors with replaceable disposable blade attachments, often with two or three cutting edges (but sometimes with four and as of recently, five cutting edges), are in common use today. Still, the double-edged blade continues to have adherents, for reasons of cost (4-7 shaves from a blade costing as low as US$0.12 vs. as high as US$3.50 for one of the latest multi-blade cartridges), comfort (some find the multi-blade cartridge hard on their skin), and pleasure (those now using the double-edged blades find such shaves, usually done with a shaving brush and shaving cream or soap, to be pleasurable).
3-blade and 4-blade cartridges introduced
Gillette introduced the first triple-blade cartridge razor, the Mach3. This further escalated the "arms race" with rival Schick. This competition for the most blades on a safety razor has been often parodied, such as in a 2004 article in The Onion titled "Fuck Everything, We're Doing Five Blades", two years before the first five-blade razor was released.[ Gillette later upgraded the Sensor system by adding a third blade to create Sensor3.
Schick responded with the Quattro, the first four-blade cartridge razor. These innovations are marketed with the message that they help consumers achieve the best shave as easily as possible. Another impetus for the sale of multiple-blade cartridges is that they have high profit margins. With manufacturers frequently updating their shaving systems, consumers can become locked into buying their proprietary cartridges, for as long as the manufacturer continues to make them.
Courtesy : Gillete
Recent developments
The latest razor introduced by Gillette is the Gillette Fusion brand shaving system, which utilizes a five-blade cartridge razor with an additional single blade for trimming. An entire line of shaving products were introduced as part of the Fusion brand system.
Pic :Gillete Fusion
Pic: Schick Extreme
Gillette has also produced powered variants of the Mach3 (M3Power, M3Power Nitro) and Fusion (Fusion Power and Fusion Power Phantom) razors. These razors accept a single AAA battery which is used to produce vibration in the razor. This action, as advertised by Gillette, was intended to raise hair up and away from the skin prior to being cut. These claims were ruled in court as "unsubstantiated and inaccurate."[ Schick also offers a powered version of their Quattro product called the Schick Quattro Power.
Quality Control
All finished razor components must conform to tight specifications before they are released. For example, blades must meet a designated hardness rating and contain a certain amount of steel. Gillette blades must meet a standard knows as Vickers hardness of at least 620 and a carbide density of 10-45 particles per 100 square microns to avoid rejection. The equipment itself operates so precisely that Gillette measures its reject rate in parts per million. Similarly, molded plastic parts are closely inspected by operators with lighted magnifying glasses to check for loose flashing or rough edges; they alert technicians when problems are discovered. In addition, razor components are checked by a computerized vision system which compares a critical dimension to a reference.
The Future
Razor manufacturers like Gillette are constantly designing new and improved shaving systems. Their commitment to improved materials science continues to produce blades of increased hardness that are capable of sustaining sharp edge for more shaves. Advanced head design allows the blades to contact the face without cuts or nicks. They are also constantly updating their manufacturing equipment. The future manufacturing techniques also improve efficiency in molding and stamping operations. Gillette claims they are twice as fast as they were 10 years ago and have fewer defects.
